Standard Wash(Hybrid Multis... (Agilent Modular LC)
Click here to see this page in full context

 

 

Standard Wash (Hybrid Multisampler Injection Path Cleaning)

Specify the parameters for a standard needle wash in this section:

Mode

Select the wash location by clicking the down arrow and selecting the needle wash mode from the list. You can select from Flush Port (default location) or Wash Vial.

Time

The Time field is enabled only if you have selected Flush Port. It enables you to specify a flush time in seconds between 0 and 9999 seconds in steps of 1 second. The peristaltic pump continues purging for 15 sec after needle is lifted to ensure that the wash solvent is completely moved to waste.

Location

The Location and Repeat fields are enabled only if you have selected Wash Vial. The Location field allows you to specify a wash location:

  • Specify vial locations in the format Vial X, where X is the vial number.

  • Specify well locations in the format D<Drawer #><F (front) or B (back)-<Row Character><Column Number>, for example, D1F-A-1. The values of <Row Character> and <Column Number> depend on the wellplate type.

    D<Drawer #>F (front) or B (back)-<Row Character>-<Column Number>

    For example: D1F-A-1

    The sample location is specified by:

    1. the number of the drawer in the sample hotel

    2. The position of the sample container in the drawer (front or back)

    3. The sample location in the sample container

    P<Plate #>-<Row Character>-<Column Number>

    For example: P1-A-1

    The sample location is specified by:

    1. the plate number in the sample hotel

    2. The sample location in the sample container

    Plate numbering starts with the bottom drawer front, then bottom drawer back, and continues upwards.

Only one of the well location formats may be available, depending on your data system.

Repeat

The Repeat field is available only if you have selected Wash Vial.

The Standard Wash parameters are enabled only when Standard Wash is selected in the Needle Wash section of the Method.

For more information, refer to the module's User Guide.