Feed Injection Mode(Injecti... (Agilent Modular LC)
Click here to see this page in full context

 

 

Feed Injection Mode (Injection Path Cleaning)

Inner Wash Mode

Adds the following steps to the table. These steps are carried out after the sample has been injected:

Off

No Inner Wash is performed.

  • Reconditioning

    Select the solvent to use to flush the injection path.

Standard

  • Inner wash

    Select the solvent to use and specify the volume.

  • Reconditioning

    Select the solvent to use to flush the injection path.

Extended

  • Inner wash

    Select the solvent to use for the first wash and specify the volume.

  • Inner wash

    Select the solvent to use for the second wash and specify the volume

  • Seat wash

    Select the solvent to use for the first seat wash and specify the volume.

  • Seat wash

    Select the solvent to use for the second seat wash and specify the volume.

  • Reconditioning

    Select the solvent to use to flush the injection path.

Outer Wash Mode

Adds the following steps to the table. These steps are carried out after the sample is drawn, before the sample is injected. A Reconditioning step after the sample has been injected is always the final step of the process. Specify the sample to use for reconditioning.

Off

No Outer Wash is performed.

Standard

  • Outer wash

    Select the solvent to use and specify the duration of the wash.

Extended

  • Outer wash

    Select the solvent to use for the first wash and specify the duration of the wash.

  • Outer wash

    Select the solvent to use for the second wash and specify the duration of the wash.