Show only specific samples or signals

Specific samples

If you want to show only the signals for a specific sample (here: the sample SSRSD1) in a chromatogram, you can filter for the sample name.

Expression	Operation	Value
=Sample_Name	=	="SSRSD1"

In order to compare the signals for two different samples, add a second expression for the other sample name. The two expressions will automatically be linked by Or . Alternatively, you can use the Contains operator and a wildcard in the Value field:

Expression	Operation	Value
=Sample_Name	Contains	="SSRSD *"

Specific signals

If you want display only the signals from a specific detector, you can filter for the detector name (here: DAD1). The detector name is usually contained in the first characters of the signal name. Therefore you filter for all signals where the relevant characters are contained in the signal name.

Expression	Operation	Value
=Signal_Name	Contains	="DAD1"

If you want to filter for one specific signal, use the complete signal name (here: DAD1 A, Sig=270,8 Ref=500,100) in the filter expression.

Expression	Operation	Value
=Signal_Name	=	="DAD1 A, Sig=270,8 Ref=500,100"