Add BootP settings

1. Click Administration > Instrument Controllers.

2. Select an instrument controller and click BootP Settings.

   

3. Click Add.

4. Enter the:

   • MAC Address (for example, 00-13-21-5B-85-E4). To get the MAC address, see Copy the MAC address or Save the MAC address.

   • IP Address (for example, 16.32.110.117)

   • Description

   • Subnet Mask – This box is automatically filled with the default setting. Enter the correct values for your network setup.

   • Gateway – This box is automatically filled with the default setting. Enter the correct values for your network setup.

5. Click OK.