In the Post-column Cooling section, specify the temperature of the post-column cooler.
Select the Not controlled option to deactivate post-column cooling.
Select the middle option to control the temperature; enter the required temperature in the adjacent field.
Limits: -5.0 to 80.0°C (G1316A) or -5.0 to 100.0°C (G1316B/C) in steps of 0.1°C.
Select the As Detector Cell option to set the temperature to the cell temperature of the configured detector. This option is available only if a G1315C DAD SL or a G1365C MWD SL is configured. Note that this option is not available for the G1315D DAD or the G1365D MWD. When more than one detector that supports this function is configured, the following priorities are applied:
the G1315C DAD SL has priority over the G1365C MWD SL;
for two detectors of the same type, the one with the lower serial number has priority.