Plumbing (Valve Thermostat Cluster)

The Plumbing section shows the Valve Thermostat Cluster configuration in tabular form. The table has five columns:

Path

Specifies the path to a specific location in the Valve Thermostat Cluster. The listed paths depend on the selected Topology. You cannot edit this column.

Color Code

Specifies the color-coding of the column connected at this path. You can select from eight predefined colors.

Usage

Specifies how this path is used. You can specify the following:

• Column

  A column is connected. The Column Host and Location identify where the connected column is located..

• Bypass

  A bypass path.

• Waste

  The waste path.

• None

  The path is not used.

Column Host

Specifies the column device (column compartment) in which the column is installed.

Location

Specifies the temperature zone in the selected column compartment. Depending on the configured column hosts, you can choose from:

• Left 1 .. Left n

  left side positions for half-length columns

• Right 1 .. Right n

  right side positions for half-length columns

• Full 1 .. n

  full-length columns occupying both sides

  For full-length columns, the RFID tags are expected to be situated on the left side of the device.

• Upper

  G7130A Integrated Column Compartment only

• Lower

  G7130A Integrated Column Compartment only

• Waste

• Bypass

• None

  no connection or connection to an external column

Be sure to configure tagged columns in the correct position, otherwise the column information will not correspond to the information stored in the column tag.