Change Temperature (Valve Thermostat Cluster Timetable)

Enables you to set the temperature of the temperature zones of the Valve Thermostat Cluster.

Zone	Click the down-arrow and select the zone whose temperature to change from the drop-down list.
Temperature Mode	Click the down-arrow and select the temperature mode from the drop-down list: Select Not Controlled to turn off the temperature control of the selected zone. Select Temperature to set the zone to a new temperature. Enter the required temperature in the Temperature field.

Changes in temperature are initiated at the specified time. However, the temperature setpoint takes some time to reach the specified temperature. You cannot specify a temperature gradient for the Valve Thermostat Cluster.

If you have enabled the As detector cell option in the Temperature of Selected Zone section of the method setup, any temperature changes specified in the timetable are ignored.