Peakwidth (Modular LC FLD)

Peakwidth enables you to select the peak width (response time) for your analysis. The peak width is defined as the width of a peak, in minutes, at half the peak height. Set the peak width to the narrowest expected peak in your chromatogram. The peak width sets the optimum response time for your FLD. The peak detector ignores any peaks that are considerably narrower, or wider, than the peak width setting. The response time is the time between 10% and 90% of the output signal in response to an input step function.

Limits: When you set the peak width (in minutes), the corresponding response time is set automatically and the appropriate data rate for signal and spectra acquisition is selected as shown in the table:

G1321AG1321A

Peak Width (min)	Response Time (sec)	Data Rate (Hz)
<0.0063	0.063	37.04
>0.0063	0.13	37.04
>0.013	0.25	37.04
>0.025	0.5	18.52
>0.05	1	9.26
>0.1	2	4.63
>0.2	4	2.31
>0.4	8	1.16

G1321BG1321B

Peakwidth (min)	Response Time (sec)	Data Rate (Hz)
<0.0016	0.016	144.93
>0.0016	0.031	74.07
>0.0031	0.063	37.04
>0.0063	0.13	37.04
>0.013	0.25	37.04
>0.025	0.5	18.52
>0.05	1	9.26
>0.1	2	4.63
>0.2	4	2.31
>0.4	8	1.16

G1321C and G7121AG1321C and G7121A

Peak Width (min)	Response Time (sec)	Data Rate (Hz)
<0.0031	0.031	74.07
>0.0031	0.063	37.04
>0.0063	0.13	37.04
>0.013	0.25	37.04
>0.025	0.5	18.52
>0.05	1	9.26
>0.1	2	4.63
>0.2	4	2.31
>0.4	8	1.16

G7121BG7121B

Peakwidth (min)	Response Time (sec)	Data Rate (Hz)
<0.0016	0.016	148.15
>0.0016	0.031	74.07
>0.0031	0.063	37.04
>0.0063	0.13	37.04
>0.013	0.25	37.04
>0.025	0.5	18.52
>0.05	1	9.26
>0.1	2	4.63
>0.2	4	2.31
>0.4	8	1.16