Execute pump command (Modular LC Flexible Cube)

The Execute pump command dialog box allows you to set up and start the operation of the pump for a specified solvent volume or a specified time.

Select a command:	Select a command from the drop-down list: Pump volume On clicking OK, the pump pumps the specified volume of solvent at the specified flow rate. Pump for time On clicking OK, the pump pumps the specified solvent and flow rate for the specified time.
Duration	Enter the required duration of pumping (in seconds) in this field. The Duration field is available only when Pump for time is selected.
Volume	Enter the required volume of solvent to be pumped (in mL) in this field. The Volume field is available only when Pump volume is selected.
Flow	Mark the check box and enter the required solvent flow rate (in mL/min) in this field. If you leave the check box cleared, the current flow rate is used.
Solvent Channel A/B	Mark the check boxes against the solvent(s) that you want to use and select the solvent channel for each solvent. If you leave the check boxes cleared, the current method settings are used.