This function allows you to change the flow rate (the rate of movement of eluent along the column) at the specified time. Changes in flow rate occur linearly from either time zero or the time of the last defined change.
|
Mode | Flow Sensor | Flow Limit (µL/min) |
|---|---|---|
Micro Flow | 4 µL (Nanoflow Pump) | 0.00 – 4.00 in steps of 0.01 |
20 µL (Capillary Pump) | 0.00 – 20.00 in steps of 0.01 | |
100 µL (Capillary Pump) | 0.00 – 100.00 in steps of 0.01 | |
Normal Flow |
Bypassed | 0.00 – 2500.00 in steps of 0.01 |
You must enter a non-zero flow rate, otherwise the EMPV is not initialized and the run will not start. |