The Blend Assist table allows you to blend two or more solvents or solvent mixtures from stock solutions. The blend must be of a solvent and a solvent plus additive. For example, you can blend 100% Water with 10% Isopropanol in Water.
Channel | The channel name. |
Solvent Group |
The type of solvent If you select a primary solvent and a solvent mixture with the same number, they are considered as a solvent blend and shown in the Solvents section as a unit. |
Calibration |
Click the down arrow and select the solvent or solvent mixture from the list. |
Name |
Enter a name for the solvent or solvent mixture in this field. |
Stock conc. |
For solvent mixtures, specify the concentration of the additive in the stock solution in this field. |
Final conc. | Enter the concentration of the additive that you want to achieve in this field. The pure solvent and solvent mixture will be blended to achieve the Final conc. |
Conc. unit |
Enter the units of concentration in this field. |