The Thermostat Temperature Control section of the Control dialog box is available when you have a thermostated autosampler with a thermostat element connected and enabled only when the Thermostat controlled by method check box in the Options section of the Configuration dialog box is cleared. It allows you to specify the temperature of the sample in your sample tray, or switch off temperature control.
Select Turned off to deactivate temperature control of the sample tray.
Select the lower option to switch on temperature control. You can type a temperature in the field or use the arrows to increase or decrease the temperature.
You can set the temperature between 4°C and 40°C in steps of 1°C.
The thermostat can cool down to a temperature 10°C below ambient only. |