Feed Injection Mode (Injection Path Cleaning)

A Reconditioning step after the sample has been injected is always the final step of the process.

Inner Wash Mode

Adds the following steps to the table. These steps are carried out after the sample has been injected:

Off	No Inner Wash is performed. Reconditioning Solvent S2 is used to flush the injection path.
Standard	Inner wash Select the solvent to use and specify the volume. Reconditioning Solvent S2 is used to flush the injection path.
Extended	Inner wash Select the solvent to use for the first wash and specify the volume. Inner wash Select the solvent to use for the second wash and specify the volume Seat wash Select the solvent to use for the first seat wash and specify the volume. Seat wash Select the solvent to use for the second seat wash and specify the volume. Reconditioning Solvent S2 is used to flush the injection path.

Outer Wash Mode

Adds the following steps to the table. These steps are carried out after the sample is drawn, before the sample is injected.

Off	No Outer Wash is performed.
Standard	Outer wash Select the solvent to use and specify the duration of the wash.
Extended	Outer wash Select the solvent to use for the first wash and specify the duration of the wash. Outer wash Select the solvent to use for the second wash and specify the duration of the wash.