Multicolumn Thermostat Dashboard Panel

Module Graphic

The items in the multicolumn thermostat graphic have the following meaning and function:

Shows the status of the column thermostat, off

or on.

The current temperatures of the left and right column thermostats are displayed below the graphic.

If temperature control is enabled in the the current method, the current temperature setpoints are displayed in square brackets.

Shows that a Thermal Equilibration Device is installed.

Shows the current position of the valve. The graphic shows the actual installed valve.

Not all valves are available for all modules.

The color of the column graphic denotes the currently selected column.

The column graphic tooltip shows the column tag details (if available).

The column description (if available) is displayed below the column graphic.

Actuals

The following multicolumn thermostat actuals are displayed:

Temp. Left	The current actual temperature (left) and setpoint temperature (right) of the left column heat exchanger.
Temp. Right	The current actual temperature (left) and setpoint temperature (right) of the right column heat exchanger.
Valve Position	The current valve position.

Context Menu

The context menu contains the following commands:

Control	Displays the multicolumn thermostat's Control dialog box.
Method	Displays the multicolumn thermostat's Method Setup dialog box.
Error Method	Set Error Method Sets the error method to the method that is currently available in the hardware. The error methods are loaded automatically on all modules if an error occurs. Clear Error Method Removes the currently loaded error method.
Identify Device	Causes the LED on the front of the module to blink for a few seconds.
Switch Valve	Displays the multicolumn thermostat's Switch Valve Position dialog box.
Switch On	Switches the column compartment thermostat on.
Switch Off	Switches the column compartment thermostat off.
Column Assignment	Displays the Column Assignment dialog box.