Edit the Source parameters (LC/MS)

1. If needed, show the Source section.

1. 1. Click Method.

1. 2. In the Acquisition Method window in the navigation pane, click Instrument Setup > SQ.
   3. In the navigation pane select Advanced Acquire > Source.

2. Set the Source Parameters.
   • Gas Temperature
   • Gas Flow
   • Nebulizer
   • Capillary Voltage
   • Capillary Current
   • Chamber Current - This is a read-only value. It shows the current in the spray chamber.

See Also

Advanced Acquire > Source (LC/MS)

Edit a method (LC/MS)