Flow Modulator Dashboard Panel

Module Panel

The items in the Flow Modulator graphic have the following meaning and function:

		Displayed when the Flow Modulator is turned off.
		Displayed when the Flow Modulator is turned on.
		Turns the Flow Modulator on (left) or off (right).

The following Flow Modulator actuals are displayed:

Split ratio

The current split ratio.

The value is calculated based on the Intended Pump Flow and Split Mode that are specified in the Flow Modulator Method.

Dilution factor

The current dilution factor.

The value is calculated based on the Intended Pump Flow and Split Mode that are specified in the Flow Modulator Method.

The context menu contains the following commands:

	Method	Displays the Flow Modulator's Method Setup dialog box.
	Error Method	Set Error Method Sets the error method to the method that is currently available in the hardware. The error methods are loaded automatically on all modules if an error occurs. Clear Error Method Removes the currently loaded error method.
	Identify Device	Causes the LED on the front of the module to blink for a few seconds.