Isocratic Pump Dashboard Panel

Module Graphic

The items in the pump graphic have the following meaning and function:

Indicates that an External Contacts board is installed.

When the solvent level falls below the specified volume, the yellow warning is shown; when the bottle is empty, the red error is shown. The tooltip for the bottle shows the solvent name.

If Level Sensing is configured, clicking on the solvent bottle displays the Level Sensing Assignment dialog box. Otherwise the Bottle Fillings dialog box is displayed.

The pressure setpoints. The red line shows the current maximum pressure limit; the gray area shows the current pressure (also shown as text).

The current solvent flow rate (in mL/min) is displayed above the pressure display.

Actuals

The following pump actuals are displayed:

Flow	The current solvent flow rate (in mL/min).
Pressure	The current pump pressure (in bar or psi).
Ripple	The current ripple (in %).
Pressure Limit	The current maximum pressure limit.

Context Menu

The context menu contains the following commands:

	Control	Displays the pump's Control dialog box.
	Method	Displays the pump's Method Setup dialog box.
	Error Method	Set Error Method Sets the error method to the method that is currently available in the hardware. The error methods are loaded automatically on all modules if an error occurs. Clear Error Method Removes the currently loaded error method.
	Identify Device	Causes the LED on the front of the module to blink for a few seconds.
	Switch On/off	Toggles the status of the pump, on or off.
	Bottle Fillings	Displays the Bottle Fillings dialog box.
	Level Sensing Assignment	Displays the Level Sensing Assignment dialog box. The menu item is present only when Level Sensing is configured.
	Zero	Displays the Zero dialog box. The menu item is present only when Level Sensing is configured.