Enable Analysis (pressure-dependent)

With any pressure

Specifies that the start of the analysis is independent of the pressure.

When pressure is

Specifies that the analysis starts only when the pressure is at a specified value, within a specified tolerance.

Enter the pressure in the field; you can enter a pressure between 0 and 10 bar (145 psi, 1000 kPa) in steps of 1 bar (14.5 psi, 100 kPa).

Enter the tolerance in the within +/- field; you can enter a tolerance up to 5 bar (72.5 psi, 500 kPa) in steps of 1 bar (14.5 psi, 100 kPa).