Change Peakwidth (G1362A only)

Use this function to change the peak width (response time) at the specified time. The peak width is defined as the width of a peak, in minutes, at half the peak height.

Limits: When you set the peak width (in minutes), the corresponding response time is set automatically and the appropriate data rate for signal acquisition is selected as shown in the table:

Peakwidth G1362A

Peak Width (min)	Response Time (sec)	Signal Data Rate (Hz)
<0.0063	<0.063	37
>0.0063	0.13	37
>0.013	0.25	37
>0.025	0.5	18.5
>0.05	1	9.26
>0.1	2	4.63
>0.2	4	2.31
>0.4	8	1.16