Plumbing

Path

The number of the path; the number of available paths depends on the topology of the Valve Thermostat Cluster.

Usage

The usage of the path. This can be a column, a connection to Waste, a connection to Bypass, or None. Click the down-arrow and select the usage from the drop-down list.

Column Host

The column device to which the path is connected. The available column devices depend on the configuration of the Valve Thermostat Cluster. Click the down-arrow and select the column device from the drop-down list.

Location

The location of the column in the column host. Columns can be either half-length or full-length (full-length columns take up two positions). Click the down-arrow and select the location from the drop-down list. Depending on the configured column hosts, you can choose from:

Left 1 .. Left n (left side positions for half-length columns)

Right 1 .. Right n (right side positions for half-length columns)

Full 1 .. n (full-length columns occupying both sides)

Upper (G7130A Integrated Column Compartment only)

Lower (G7130A Integrated Column Compartment only)

Waste

Bypass

None (no connection, or connection to an external column)