The Modify Needle and Tubing dialog box allows you to register changes to the needle and/or tubing kit in the module's firmware.
|
Installed Needle |
When you have changed the needle type, click the down-arrow and select the new needle type from the drop-down list. |
|
Tubing Kit |
When you have changed the tubing kit, click the down-arrow and select the new tubing kit from the drop-down list. |
In the case of a fraction collector cluster (FCC), the parameters for different fraction collectors can be specified individually in separate tabs.
NOTE
When you close the dialog box with OK, an automatic cold restart is triggered in order to update the firmware with the new tubing and needle information.
base-id: 3408402827
id: 3408402827