Agilent User Information System

Click here to see this page in full context

MWD Dashboard Panel

Module Graphic

The items in the MWD graphic have the following meaning and function:

	Indicates that an External Contacts board is installed.
	The color indicates the status of the Vis lamp: Gray: The lamp is off. Yellow: The lamp is on.
	The color indicates the status of the UV lamp: Gray: The lamp is off. Purple flash: The lamp is igniting. Purple: The lamp is on.
	Denotes a UV lamp with a lamp tag. The tooltip shows the information on the lamp tag. Color coding is as above.
	Denotes a detector cell with a cell tag. The tooltip shows the information on the cell tag. This graphic is present only when the detector cell includes a cell tag.
	When balancing is in progress, the graphic is yellow (not ready).

Actuals

The MWD actuals shows a table of the current signals in three columns:

Channel	The signal definition: A..E: G1365A/B A..H: G1365C/D and G7165A
WL	The signal wavelength (in nm).
BW	The bandwidth of the signal wavelength (in nm).
RefWL	The reference wavelength (in nm) or off.
RefBW	The bandwidth of the reference wavelength (in nm) or off.
mAU	The signal output (in mAU).

Context Menu

The context menu contains the following commands:

	Control	Displays the detector's Control dialog box.
	Method	Displays the detector's Method Setup dialog box.
	Error Method	Set Error Method Sets the error method to the method that is currently available in the hardware. The error methods are loaded automatically on all modules if an error occurs. Clear Error Method Removes the currently loaded error method.
	Identify Device	Causes the LED on the front of the device to blink for a few seconds.
	Balance	Balances the detector.
	Switch on	Ignites the UV lamp.
	Switch off	Switches off the UV lamp.
	Switch on	Switches on the Vis lamp. This item is present only when the detector includes a Vis lamp.
	Switch off	Switches off the Vis lamp. This item is present only when the detector includes a Vis lamp.

16-Jul-2025