VWD Dashboard Panel
Module Graphic
The items in the VWD graphic have the following meaning and function:
| Indicates that an External Contacts board is installed. |
| The color indicates the status of the UV lamp:
|
| Denotes a UV lamp with a lamp tag. The tooltip shows the information on the lamp tag. Color coding is as above. |
| Denotes a detector cell with a cell tag. The tooltip shows the information on the cell tag. This graphic is present only when the detector cell includes a cell tag. |
| When balancing is in progress, the graphic is yellow (not ready). |
Actuals
The following VWD actuals are displayed:
Wavelength | The current signal wavelength (in nm). |
Absorbance | The current signal output (in mAU). |
Context Menu
The context menu contains some or all of the following commands, depending on the CDS:
| Control | Displays the detector's Control dialog box. |
| Method | Displays the detector's Method Setup dialog box. |
| Error Method |
|
| Identify Device | Causes the LED on the front of the module to blink for a few seconds. |
| Balance | Balances the detector. |
| Switch on | Ignites the UV lamp. |
| Switch off | Switches off the UV lamp. |
| Take Blank Scan | Carries out a wavelength scan on the blank. The blank spectrum is automatically subtracted from the sample spectrum. |
| Take Sample Scan | Carries out a wavelength scan on the sample. |
| Abort Scan | Aborts the current scan. |
base-id: 3392420107
id: 9007202647161099