The following trigger settings are available in the timetable (the Peak Trigger settings in the timetable are not available for Agilent Mass Spectrometer Detectors):
Trigger source | Click the down-arrow and select the trigger source from the drop-down list. |
Peak Detection Mode | You can select from:
|
Threshold | The height of the peak that triggers collection |
Up Slope | The slope of the rising peak. The slope value is based on the first derivative of the signal. |
Down Slope | The slope of the falling peak. The slope value is based on the first derivative of the signal. |
Upper Threshold | A maximum peak height threshold that is used until the slope values are applied. This ensures that collection continues even for a saturated signal that might be expected to switch collection off. The value of the Upper Threshold must be greater than that of the Threshold. |
Maximum Peak Duration Mode | Click the down-arrow and select the mode from the drop-down list. You can select from:
|
Maximum Peak Duration | The maximum amount of time a peak trigger remains active. |
base-id: 3408210443
id: 9007202662951435