Valve Dashboard Panel

Module Graphic

Shows a graphic of the actual installed valve.

참고

The G1170A External Valve Drive shows the graphic for the valve head that is installed.

The following valve actual is displayed:

Position

The current valve position.

The context menu contains the following commands, depending on the configured valve:

	Control	(G1170A only) Displays the valve's Control dialog box.
	Method	Displays the valve's Method Setup dialog box.
	Error Method	Set Error Method Sets the error method to the method that is currently available in the hardware. The error methods are loaded automatically on all modules if an error occurs. Clear Error Method Removes the currently loaded error method.
	Identify Device	Causes the LED on the front of the module to blink for a few seconds.
	Switch Valve	Displays the Switch Valve Position dialog box, which allows you to switch the valve to a new position. 참고: The menu graphic depends on the valve type.