Enable or disable individual timed events

When developing a processing method, you may need to use different timed events in different combinations. Instead of deleting events and adding new events every time, you can simply enable or disable individual events.

Preparations

• To be able to carry out the procedure as described, you need the privilege Processing Method > Edit integration parameters . Privileges are configured in the Control Panel.

• If the project enforces method approval, the method status must be Generic. For details, see Method approval.

1. In the Processing Method window, select the Integration Events > Standard node.

2. Add several timed events.

3. To disable an individual event, clear the check box in the Use column.

   When you reprocess an injection, this integration event will not be taken into account any more.

4. To enable an individual event, select the check box in the Use column again.

   When you reprocess an injection, this integration event will be taken into account again.

NOTE

If you display integration events in the chromatogram, disabled events are also shown. The event information is shown in italics.