Order No | Sequence line number at the acquisition time, if sample was analyzed within a sequence |
Inj. # | Number of injection if a sample was injected multiple times. Starts with 1. |
MW Algorithm |
|
Signal Name | Short name of the detector signal, for example, MS1 -TIC SCAN JETSTREAM Frag=200V Gain=1.0 |
Data File | Name of data file |
Sample Name | Name of sample as entered in the CDS |
Compound Name | Name of identified compound |
Spectrum RT (min) | Retention time of deconvoluted spectrum. Can be a single time point or a time range. |
Mode | Manual or Automatic. Indicates whether the deconvolution result was generated by manual deconvolution (right-click a spectrum and select Run deconvolution) or automatic deconvolution (enabled in the processing method). |
Component | Unique identifier assigned to the selected component. Identifiers are assigned in this order: A-Z, then 0-9. A maximum of 36 components can be identified. |
Mass (Da) | Deconvoluted (neutral) mass |
Absolute Abundance | The absolute height of the selected component peak |
Relative Abundance (%) | The height of the selected component peak relative to the height of the largest component peak (height selected component / height largest component * 100) |
Relative Quantitation (%) | Percentage the selected component is contributing to the summed total height of all components (height selected component / sum of height of all components * 100) |
Actual Peak | Ion (peak) in spectrum |
Charge | Charge state assigned to this ion |
Compound Mass (Da) | Deconvoluted (neutral) mass calculated from this single ion |
Pred Peak (Avg) | Predicted ion (peak), calculated using an average compound mass |
Pred Peak (Curve Fit or Centroid) | Predicted ion (peak), calculated using the deconvoluted mass and the Centroid or Curve Fit algorithm as specified in the processing method |
base-id: 14494982411
id: 14494982411