This check box is marked to indicate that an optional column switching valve has been detected during autoconfiguration. For manual configuration, mark the Valve installed check box to indicate that a column switching valve is installed.
The valve type is automatically detected during autoconfiguration. For manual configuration, select the valve type from the drop-down list.
The driver allows all known valves to be configured in the configuration UI of the G7116A. However, the G7116A supports only valves with <=4 positions and <=1000 bar in online mode. Inserting an unsupported valve into the G7116A creates a permanent error Unsupported valve mounted in the module. |
Specify the column switching valve parameters in the Valve Position/Column section of the method setup.
For all valve types except Generic Valve, the number of Valve Ports and Valve Positions and the Maximum Valve Pressure are given automatically. For the Generic Valve type, enter these values manually.