Edit the Timetable (LC/MS)

Use the Timetable to change the direction of the diverter valve during the run and send the stream either to the MS or to Waste.

During a run, you may want to control when the stream from the LC is going to the MS. You can set the diverter valve to only send the LC stream to the MS during certain times during the run.

  1. If necessary, show the Timetable section.

    1. Click Method.

      Ribbon_MethodLayout.jpg
    2. In the Acquisition Method window in the navigation pane, click Instrument Setup > SQ.

    3. In the navigation pane, select Method > Timetable.

    In the navigation pane, select Advanced Acquire > Acquisition.

  2. Enter the Start Time (min).

  3. Select the Type. The only option is Diverter.

  4. Select the Value. Options include To MS or To waste.

  5. To add another row to the table, click TB_RampAddRow.jpg.

  6. To delete a row from the table, select the row and then click TB_RampDeleteRow.jpg.

See Also

Edit a method

Method > Timetable