Moves the valve to a specified position
Parameter | Value | Description |
|---|---|---|
Mainpass |
| Turns the valve to the main flow path position |
Main+Start |
| Turns the valve to the main flow path position and generates a start pulse.
|
Bypass |
| Turns the valve to the bypass position. |
Main In |
| Turns the valve to the main flow path position while the needle is at the Source for a Time between 1 and 99 seconds. The source can be a Sample, a Location, Seat, Vial+ or Air. |
| Sample | The position specified in the sample information or sequence/worklist. |
| Location | A specified location. |
| Seat | The seat capillary. |
| Vial+ | Vial+ defines an offset from the current sample vial number. For example, if the current sample vial is 1, a value for Vial+ of 3 specifies a vial that is three positions away from the sample vial, in this case vial 4. The limits depend on the sample tray configuration: -15 to +15 for the 8 ml-vial tray -40 to +40 for the 2 ml-vial half-tray -100 to +100 for the 2 ml-vial full tray
|
| Air | Air, above the seat capillary. |
base-id: 3267962891
id: 3267962891