Module List

Module Identifier

The product number and serial number of the module.

is combined device

This read-only check box is marked when the device is part of a G7158B Preparative Open-Bed Sampler/Collector.

Name

The name given to the module during configuration.

Is used (FCC only)

This check box is marked to indicate that the module is used in the selected Topology.

NOTE: If a G9322A Clustering Valve is included in the instrument, it must either be configured and used in the FCC or physically removed from the instrument.

Add (FCC only)

Displays a Select module type dialog box, which allows you to add a new fraction collector module to the list. click the Module type down-arrow and select the module type to add from the drop-down list.

Configure

Displays the Configure single device dialog box, which allows you to configure the selected module and its options

Remove (FCC only)

Allows you to remove the selected module from the list. You must remove all modules that are not used in the current topology from the list.