Specify how to calculate with dilution factors

OpenLab CDS allows you to choose to use dilution factors either as a divisor or as another multiplier.

Preparations

• To be able to carry out the procedure as described, you need the privilege Processing Method > Edit calibration parameters . Privileges are configured in the Control Panel.

• If the project enforces method approval, the method status must be Generic. For details, see Method approval.

1. In the Processing Method window, select the Compounds > Calibration node.

2. Select the General tab.

3. Under Concentration and corrected amount calculation, choose the required mode.

The selected mode will be applied on amount calculation im the method and in the injection list.