Show the calibration curve of a specific compound
In the Injection Tree, highlight the injection containing the calibrated compound.
If the Injection Results window is hidden, click Injection Results in the Home ribbon tab to show the window.
In the Injection Results window, select the calibrated compound.
The table lists all detected compounds, and if the result set has already been processed, also the compound amounts based on the calibration curve.
The calibration curve for the selected compound is shown in the Calibration Curve window.
As the calibration curve builds up during processing of a sequence, you see the curve as it has been available at the time of processing the selected sample. For details, see Data of displayed curve.
|
| Blue squares: average calibration points (not shown if you use individual points for curve calculation) |
|
| Yellow diamond: point corresponding to the selected injection. The compound area and the calculated amount for the selected injection are drawn with a dashed line. |
|
| Blue circles: points corresponding to other calibration samples in the same sequence. |
|
| Red cross: point has been disabled and is ignored for calculations. |
