With integration events, you can configure how your signals are being integrated at specific time ranges. For example, turn off the integration at 0 min and turn it on again at 2 min.
Prerequisites
To be able to carry out the procedure as described, you need the privilege Processing Method > Edit integration parameters. Privileges are configured in the Control Panel.
If the project enforces method approval, the method status must be Generic. For details, see Method approval.
Under Methods in the navigation pane, select the processing method you want to edit.
In the Processing Method window, select the Integration Events > Standard node.
Right-click in the area next to the parameters table, and select Add integration event from the context menu.
If the context menu does not open, you might be in Edit Mode in the parameters table. Press [Esc] to exit the Edit Mode. |
or Alternatively, you can press [INS] or click Add integration event in the Method ribbon tab.
A new row is added to the parameters table.
Enter the required start time for the event, choose the type of event, and provide a value for the event.
For example, set Integration to Off at 1 min, and with a second parameter, set it to On again at 1.5 min. Integration is then off starting at 1 min, and on again at 1.5 min.
Under Methods in the navigation pane, select the processing method you want to edit.
In the Processing Method window, select the Integration Events > Standard node.
To select an entire row, click one of the dark gray squares to the left of the parameters table.
Right-click in the area next to the parameters table, and select Delete integration event from the context menu.
or Alternatively, you can press [DEL] or click Delete integration event in the Method ribbon tab.
The selected row is deleted from the parameters table.