Import an EZChrom method

Prerequisites

• You have created the method with EZChrom A.04.01 or higher.

• EZChrom Elite methods are not supported.

• To be able to carry out the procedure as described, you need the privilege Project Management > Edit content of project. Privileges are configured in the Control Panel.

• When working in a compliant system, ensure that method audit trails are enabled for your project. Projects are configured in the Control Panel. See Audit Trail Settings.

1. In the Data Processing view, select the Processing ribbon tab.

2. Open the submenu of the New Method button , then select New Method from EZChrom.

3. In the Create New Processing Method dialog, select the required method configuration.

Choose the method configuration carefully. You will not be able to change it afterwards.

4. Click Browse to select the EZChrom method file (*.met).

Choose the Windows file system or Storage tab to load the method from the Windows file system or from Content Management.

To select multiple files, hold the [Ctrl] key while clicking the files. To select multiple consecutive files, hold the [Shift] key and click a second file.

5. Click Create method.

6. Ensure that you selected the EZChrom integrator in the General > Properties node of the processing method.

7. Carefully check all imported parameters.

See Also

• Imported EZChrom method parameters
• Use existing EZChrom data and methods
• Use an EZChrom calibration curve to quantify OpenLab CDS data
• Copy integration events to another signal